Android 4 4 1 Landing soon and Fixes Nexus 5 Camera

Android 4.4.1 landing soon and fixes Nexus 5 camera. The Nexus 5 from Google is quite an awesome device, however its camera isn’t the greatest. Even though the Nexus 5′s camera features a optical image stabilization, taking shots from it are painfully slow and generally out-of-focus. Google is aware of this and as per The Verge, a new update scheduled to be released in the next few days fixes a lot of issues with the Nexus 5 camera. They’ve managed to get a hands-on experience with Android 4.4.1 and here is what they have to say:

Speed is a theme for the update, and the Nexus 5′s camera really does feel faster across the board. The app launches a full second quicker than it did before the update, meaning you’ll miss many fewer shots than before. There’s also a new progress indicator in HDR+ mode, which makes the process, longer by necessity, feel a lot more straightforward. It’s the first of what Burke says will be a series of interface changes, as Google tries to make Android cameras a little more controllable and obvious. Right now, nearly every setting is buried under layers of menus, and Burke says Google is working on undoing that.

Update: Google has started rolling out the 4.4.1 update- check your device to see if you have received the update.

Sourced by: Tech News

Comments

OP AMP INTEGRATOR CALCULATOR

Enter the Input Voltage,Vin: Volts Enter the Frequency, f: Hertz Enter the Input Resistance, Rin: Ohms Enter the Value of Capacitor, C: Farads Output Voltage, Vout: Volts OP AMP based Integrator Tutorial and Design

Using the TLP250 Isolated MOSFET Driver Explanation and Example Circuits

I’ve already shown how to drive an N-channel MOSFET (or even an IGBT) in both high-side and low-side configurations in a multitude of ways. I’ve also explained the principles of driving the MOSFETs in these configurations. The dedicated drivers I’ve shown so far are the TC427 and IR2110. Some people have requested me to write up on MOSFET drive using the very popular TLP250. And I’ll explain that here. The TLP250, like any driver, has an input stage, an output stage and a power supply connection. What’s special about the TLP250 is that the TLP250 is an optically isolated driver, meaning that the input and output are “optically isolated”. The isolation is optical – the input stage is an LED and the receiving output stage is light sensitive (think “photodetector”). Before delving any further, let’s look at the pin configuration and the truth table. Fig. 1 - TLP250 Pin Configuration Fig. 2 - TLP250 Truth Table Fig. 1 clearly shows the input LED side and the receiving photodetector as well...

Block diagram of AM transmitter and receiver with explanation

Block diagram of AM transmitter and receiver with explanation AM Transmitter : Transmitters that transmit AM signals are known as AM transmitters. These transmitters are used in medium wave (MW) and short wave (SW) frequency bands for AM broadcast. The MW band has frequencies between 550 KHz and 1650 KHz, and the SW band has frequencies ranging from 3 MHz to 30 MHz. The two types of AM transmitters that are used based on their transmitting powers are: · High Level · Low Level High level transmitters use high level modulation, and low level transmitters use low level modulation. The choice between the two modulation schemes depends on the transmitting power of the AM transmitter. In broadcast transmitters, where the transmitting power may be of the order of kilowatts, high level modulation is employed. In low power transmitters, where only a few watts of transmitting power are required , low...

Do More

Search This Blog