Skip to main content

Posts

Showing posts with the label Infrared

LM567 Infrared Transmitter Circuit

LM567 Infrared Transmitter Circuit This infrared transmitter use PWM (pulse width modulation). The transmitter is equiped with LM567, tone decoder circuit. Audio signal ( at least 50mVvv ) is amplified with T1 and then it is used to modulate IC1. Infrared transmitter frequency is adjusted with P2 between 25 and 40KHz. LM567 Infrared Transmitter Circuit

Infrared Radar System Circuit Diagram

Chris from PyroElectro.com has a great article about a do-it-yourself radar system build with PIC18F452. It’s a great hobby project although the schematic is very complicated. This project uses three main devices to create the personal radar system. The IR Range sensor gives output, the pic microcontroller processes it and then displays the output on the led array.   Infrared Radar Circuit Schematic  The goal of this project is to create a working ir radar system. The system will only be required to measure close proximity at an angle of 90 degrees as seen in the example above. The range of system is roughly 4-30cm, 20-150cm & 1m-5.5m depending upon which sensor you choose to use. [ ]

Simple infrared remote control extender

This ultra-simple remote control extender is ideal for use with a hidden video recorder. The recorder is a Panasonic NV-SD200 and is used as part of a camera surveillance system. A PICAXE-08-based circuit is used to detect events and control the recorder. It also flashes a LED near the monitor to indicate the number of events since last viewing. Click for larger image Strangely, the NV-SD200 model refused to work with a number of commercial infrared remote control extenders, hence the need for this design. As a bonus, it uses less power than a traditional extender (no plugpacks) and the remote can still be used in the normal manner. As shown, an additional 5mm infrared LED is mounted directly in front of the equipment to be controlled. This is cabled back to a convenient location near the monitor and terminated in a 3.5mm plug. To modify the remote control unit, break the circuit to the anode of the existing infrared LED and wire in a 3.5mm headphone socket. In most cases, the LED will...

Infrared Proximity Detector Circuit

This proximity detector using an infrared detector (Fig. 1) can be used in various equipment like automatic door openers and burglar alarms. The circuit primarily consists of an infrared transmitter and an infrared receiver. Fig. 1: IR proximity detector The transmitter section consists of a 555 timer IC functioning in astable mode. It is wired as shown in the figure. The output from astable is fed to an infrared LED via resistor R4, which limits its operating current. This circuit provides a frequency output of 38 kHz at 50 per cent duty cycle, which is required for the infrared detector/receiver module. Siemens SFH5110-38 is a much better choice than SFH506-38. Siemens SFH5110-38 is turned on by a continuous frequency of 38 kHz with 50 per cent duty cycle, whereas SFH506 requires a burst frequency of 38k to sense. Hence, SFH5110-38 is used. The receiver section comprises an infrared receiver module, a 555 monostable multivibrator, and an LED indicator. Upon reception of infrared si...

Infrared Emitter Detector

This circuit have applied to line detection of robot project, Good match between the transmitter and the detector is important for proper operation, especially if the hole is large. Circuit diagram : Infrared Emitter & Detector Circuit Diagram Robot with a simple object or obstacle detection. Infrared Transmitter detector pair sensors are relatively easy to implement, although involved some degree of testing and calibration in order to make correct. They can for the impediment, motion detection, transmitters, encoders are used, and the color detection. This can be done with a piece of rope stretched between and in accordance with LED and phototransistor. A length of stiff wire or plugs can be used to set the alignment. Another method that can be used for long distances is a laser pointer shone through a hole. Source / detector alignment method The transmitter can be mounted above the track with the phototransistor placed between the rails in places like hidden deposits. Plac...

Infrared audio headphone link for TV

To listen via headphones preferably good ‘surround your ears’ muff-type headphones, which not only deliver the wanted sounds directly to your ears and hearing aid(s) but also cut back the competing sounds at the same time. If you pick the right kind of headphones, with some acoustic damping in the earmuffs, they don’t cause your hearing aid(s) to emit feedback and whistle sounds either. The result is comfortable listening at a volume level that’s right for you, where you can hear and understand everything that’s being said. Headphone jack Some TV sets do have earphone jacks, so you could simply fit a pair of stereo headphones with their own volume control (if necessary), plus a long cord and plug to mate with the jack on the TV. But many sets do not have a headphone jack, and many that do have it wired so that when headphones are plugged in, the speakers are disabled. That’s fine for you, but no good for everyone else. In any case, being hooked up to the TV via a long cable has its own...

Usefull Infrared Remote Control Extender

This ultra-simple remote control extender is ideal for use with a hidden video recorder. The recorder is a Panasonic NV-SD200 and is used as part of a camera surveillance system. A PICAXE-08-based circuit is used to detect events and control the recorder. It also flashes a LED near the monitor to indicate the number of events since last viewing. Strangely, the NV-SD200 model refused to work with a number of commercial infrared remote control extenders, hence the need for this design. As a bonus, it uses less power than a traditional extender (no plugpacks) and the remote can still be used in the normal manner. As shown, an additional 5mm infrared LED is mounted directly in front of the equipment to be controlled. This is cabled back to a convenient location near the monitor and terminated in a 3.5mm plug. To modify the remote control unit, break the circuit to the anode of the existing infrared LED and wire in a 3.5mm headphone socket. In most cases, the LED will be accessible ...

TFDS4500 Infrared Adapter Serial Transceiver

This electronic infrared adapter serial transceiver circuit is based on a TFDS4500 IC and can be used to transmit data from portable devices to a PC using IR and serial port .   Infrared Adapter Serial Transceiver Schematic TFD4500 infrared adapter it’s a low–power infrared transceiver modules for serial infrared (SIR) data communication which support IrDA speeds up to 115.2 kbit/s. In this infrared circuit transceiver it’s integrated an photo diode infrared emitter (IRED) and a low–power analog control IC.