Skip to main content

Next generation iPad to sport iPad mini like design and display Reports



Next-generation iPad to sport iPad mini-like design and display

It's that time of the year again. As we approach fall, we're getting closer to the launch of Apple's new products, as promised by CEO Cook during the company's last earnings call. This also means that we can expect new rumours and leaks to start hitting the Internet.

While a lot is already known about the iPhone 5S (the next-generation iPhone) and the iPhone 5C (the low-cost iPhone), we're also seeing new rumours and leaks related to the next-generation iPad and iPad mini.

A number of rumours have already suggested that Apple is modelling its next-generation iPad on the iPad mini in terms of design and form factor. The speculation has got more credence thanks to a new report by The Wall Street Journal. The report mentions that the new iPad will feature the same touch-panel technology that's seen in the iPad mini, making it thin and light. It cites people with knowledge of the matter as a source, and adds that Apple intends to use the film-based touch panel used in the iPad mini instead of the glass-based one that is sported by the full-sized iPad.

Recently, a video showing the front and back panel of the fifth-generation iPad assembled together, had appeared online showing a design different from the current generation iPad. Prior to that pictures of alleged back panels of the next-generation iPad and iPad mini had also appeared online. The purported iPad rear casing was slightly smaller than the casing of the current generation iPad and the site mentioned that the distance between the border and screen of the iPad 5 was much shorter than the previous iPads, indicating that the new iPad would look similar to the iPad mini with smaller bezels. The casing had the Apple logo carved out and not just printed on it, in the images.

While the exact launch dates of the new iPad and iPad mini are not known, yet, a new report by Bloomberg suggests that Apple will release new iPad models, including an iPad with a thinner body design and an iPad mini with a high-resolution screen, later this year but not at the September 10 iPhone event.

It adds that the "planned new full-size iPad, with a 9.7-inch screen, will have a body that more closely resembles the current iPad mini, with a thinner bezel than the current version. It will be the first redesign since March 2012, when Apple introduced a high-resolution iPad with the current shape."

A number of rumours suggest that Apple could release the next generation iPad mini in the fourth quarter of 2013 but it's not known if it will feature a Retina screen. Just a few days back, a report by Apple-focused website 9to5Mac claimed that Apple was testing a new iPad mini model that would include a faster processor but not a Retina display. However, a few hours later, a new report by The Wall Street Journal appeared suggesting that Apple's suppliers were ramping up production of a new iPad mini device that features a high resolution Retina screen made by Samsung.  

Anupam Saxena

Comments

Popular posts from this blog

OP AMP INTEGRATOR CALCULATOR

Enter the Input Voltage,Vin: Volts Enter the Frequency, f: Hertz Enter the Input Resistance, Rin: Ohms Enter the Value of Capacitor, C: Farads Output Voltage, Vout: Volts OP AMP based Integrator Tutorial and Design

Block diagram of AM transmitter and receiver with explanation

Block diagram of AM transmitter and receiver with explanation AM Transmitter : Transmitters that transmit AM signals are known as AM transmitters. These transmitters are used in medium wave (MW) and short wave (SW) frequency bands for AM broadcast. The MW band has frequencies between 550 KHz and 1650 KHz, and the SW band has frequencies ranging from 3 MHz to 30 MHz. The two types of AM transmitters that are used based on their transmitting powers are: ·          High Level ·          Low Level High level transmitters use high level modulation, and low level transmitters use low level modulation. The choice between the two modulation schemes depends on the transmitting power of the AM transmitter. In broadcast transmitters, where the transmitting power may be of the order of kilowatts, high level modulation is employed. In low power transmitters, where only a few watts of transmitting power are required , low...

Using the TLP250 Isolated MOSFET Driver Explanation and Example Circuits

I’ve already shown how to drive an N-channel MOSFET (or even an IGBT) in both high-side and low-side configurations in a multitude of ways. I’ve also explained the principles of driving the MOSFETs in these configurations. The dedicated drivers I’ve shown so far are the TC427 and IR2110. Some people have requested me to write up on MOSFET drive using the very popular TLP250. And I’ll explain that here. The TLP250, like any driver, has an input stage, an output stage and a power supply connection. What’s special about the TLP250 is that the TLP250 is an optically isolated driver, meaning that the input and output are “optically isolated”. The isolation is optical – the input stage is an LED and the receiving output stage is light sensitive (think “photodetector”). Before delving any further, let’s look at the pin configuration and the truth table. Fig. 1 - TLP250 Pin Configuration Fig. 2 - TLP250 Truth Table Fig. 1 clearly shows the input LED side and the receiving photodetector as well...